摘要：In collaboration with the University of California at Irvine (TJCI), we are working on a new technology that relies on the precise deposition of nanoliter molten-metal droplets that are targeted on

摘要：This paper describes an integrated methodology wherethree dimensional Computer Aided Design (CAD) data can be used to create prototype warheads for testing, and as an input to define the warhead ge

Introduction The development of a new nickel-based superalloy for use in the high-pressure turbine is turbine disk of a modern gas protracted one of the most expensive and exercises undertaken by

Abstract Knowledge of the TTT or CCT diagrams of steels is an important factor in the thermo-mechanical processing of steels. Much experimental work has been undertaken to determine such diagrams. How

Abstract: This paper describes the development of a computer software, JMatPro, for calculating the properties and behaviour of commercial alloys. These properties are wide ranging, including but not

Abstract A reasonable experimental literature has now been built up on Ti-Al-X ternary phase diagrams. However, although these basic systems give insight to phase equilibria in certain commonly used γ

Abstract For the past 3-4 years work has been undergoing on the development of a new computer programme (JMatPro) for calculating general material properties of multi-component alloys. These propertie

Abstract Ti-based alloys were one of the first material types to which thermodynamic phase diagram calculations were applied. However, the early limitations in modelling, particularly with respect to

Abstract. The strength of nickel-based superalloys usually consists of solid solution strengthening from the gamma matrix and precipitation hardening due to the gamma' and/or gamma

Introduction Cast aluminium alloys have widespread applications for structural components in the automotive industry. For example, in power-train applications, including engine blocks, cylinder heads