摘要：The purpose of this study is to demonstrate a methodology for springback compensation in sheet metal stamping operations.

摘要：To demonstrate the effective use of such a coupled multi-solver approach, the results of four real-life examples are presented in this paper.

摘要：The history of public domain finite element models of the side impact anthropometric test dummy are summarized andrecent improvements are briefly discussed. The performance of the two most recent f

摘要：A program is underway to develop and validate a high fidelity finite element model of a full size car for crashworthiness analysis. This study is part of an overall program to develop a set of deta

摘要: 介绍一个实现导弹战斗部威力场数值仿真的集成化软件系统。按照威力场仿真的功能 要求,对系统框架和接口进行了设计,给出了战斗部预制破片建模和参数化有限元建模的方法。完 成的系统集成了有限元建模、力学仿真和后处理工具。

摘 要：对舰船在水下非接触爆炸载荷下动态响应的研究有助于深入了解舰船失效规律和损伤机理，为舰船损伤分 析与技术保障系统的建立提供良好的数据与技术支撑。本文基于视景仿真和舰船损伤仿真系统研究的需要，选取 Multigen Creator 和TrueGrid 混合的建模方法；通过在Ansys 系统中整合、重新构网生成混合计算模型，有效 提高了LS-DYNA 进行数值计算的精度；最后，通过模拟船体在非接

摘要：研究了用于仿真计算的射孔弹有限元模型参数化建立方法。针对弧顶单锥型射孔弹分别进行了药型罩和 装药结构特征分析及壳体结构特征分析。基于ＴｕｒｅＧｒｉｄ软件研究射孔弹结构的参数化离散方法，提出仿真计算 用有限元模型的参数化建立方法。

摘要：利用VB 语言设计的友好的人机交互界面，获取船闸闸首模型的参数化数据并对数据进行分析处理，生成 TrueGRID 软件能识别的命令流；编制VB 与TrueGRID 的接口程序，导入命令流至TrueGRID 软件，生成可视化的船闸闸首三维有限元网格。提高了有限元计算前处理的工作效率。

摘要:The paper reports experimental and numerical simulation of ballistic impact problems on thin composite laminated plates reinforced with Kevlar 29. Ballistic impact was imparted with simulated fragm

摘要：The objective of this thesis is to explain why the simulation of this test did not show satisfying agreement with the physical test.By designing and constructing a welded component of standard beam